my-machines Neon Safety Instructions:

At my-machines, our priority is to ensure your safety and the safety of the machine. Therefore, it is crucial that you read this article carefully and follow our guidelines.

Maintain constant supervision!

It is essential that you never leave your my-machines Neon operating without your attention. When starting any task, closely monitor the cutting and marking operations throughout the process.

If you notice any irregularities, immediately turn off the machine.

Always operate with the lid closed

For your safety, the my-machines Neon automatically stops working when the lid is opened and resumes from where it left off when the lid is closed. However, if you lift the lid and the work continues, avoid placing your hands inside the machine. The laser beam is invisible and reflects off the side mirrors of the machine, potentially causing skin burns.

Be aware of exhaust

When cutting or marking materials, they release gases that can be harmful to health. Make sure the exhaust is working correctly by installing the exhaust hose of your my-machines Neon to an air outlet.

Prohibited materials in my-machines Neon

Some materials, when burned (the method of laser cutting and engraving), produce toxic gases harmful to health and the machine, and are prohibited from use in My-machines laser machines. Check the list:

• PVC
• VINYL
• ABS
• FIBERGLASS
• Neon FIBER
• Any material containing CHLORINE

If you have any questions about the use of certain materials, contact Support or check the list of recommended materials in the my-machines store.

Keep preventive maintenance up to date

Preventive maintenance is crucial to keep your my-machines Neon in full operation and avoid problems. Pay attention to the intervals to perform the procedures. You can download the maintenance manual here or follow our series of articles on the topic.

In this article, we highlighted some important points to ensure you use your Neon safely. If you have any questions, contact support!