Skip to content

Slicer Profiles

MyMachines provides dedicated OrcaSlicer profiles for the My-Cloner and other MyMachines printers.

A My-Cloner profile set already exists and includes machine definitions, printable-bed assets and print-process profiles for multiple nozzle sizes.

However, the current profiles are being reviewed and updated for the My-Cloner Rev A hardware and Klipper configuration.

Rev A Profiles Under Validation

The existing My-Cloner profiles were developed from an earlier configuration and still contain legacy settings inherited from previous printer definitions.

They should not yet be considered the final My-Cloner Rev A profiles.

Current Profile Structure

The My-Cloner profile set currently includes machine configurations for:

Nozzle Status
0.2 mm Existing profile — validation required
0.4 mm Existing profile — validation required
0.6 mm Existing profile — validation required
0.8 mm Existing profile — validation required

The standard My-Cloner Rev A nozzle is:

0.4 mm

Multiple print-process profiles also exist for different layer heights and printing priorities, including detail, quality, standard, speed and draft profiles.

OrcaSlicer

The recommended slicer for the My-Cloner is:

OrcaSlicer

The long-term goal is to maintain a complete MyMachines vendor profile so MyMachines printers can be selected and configured directly through OrcaSlicer.

Rev A Update

Before the profiles are released as official My-Cloner Rev A profiles, they will be reviewed against the final machine configuration.

The review includes:

  • Build volume
  • Printable area
  • Nozzle configuration
  • Maximum speeds
  • Acceleration limits
  • Klipper G-code
  • Start G-code
  • End G-code
  • Bed model and texture
  • Filament compatibility
  • Print-process profiles

Legacy Prusa- and MK3-specific commands and identifiers will be removed where they are not applicable to the My-Cloner Rev A.

Klipper Configuration Dependency

The final OrcaSlicer profiles will be validated together with the official My-Cloner Rev A Klipper configuration.

This ensures that slicer commands, motion limits and printer macros match the actual printer.cfg.

Download

The final My-Cloner Rev A OrcaSlicer profile package is not yet available for public download.

The download will be added here after the profiles have been reviewed and tested on the Rev A machine.

For the future Klipper configuration:

Firmware Configuration

For the standard printer specifications:

Bill of Materials

For printable parts:

STL Files