Skip to content

Bill of Materials

Download the complete My-Cloner Rev A Bill of Materials.

The BOM contains the mechanical, frame, fastener, electronic, hotend and 3D printed components required to build the printer.

Authoritative BOM

My-Cloner BOM V2 is the authoritative Bill of Materials for the My-Cloner Rev A.

The web documentation provides a human-readable reference, while these downloadable files contain the complete revision-controlled BOM.

Available Formats

  • Excel Workbook

    The complete editable BOM workbook, organised into separate sections for each component group.

    Format: XLSX

    Download My-Cloner BOM V2

  • CSV

    A consolidated version of the BOM with all component groups combined into a single table.

    The Section column identifies the original BOM category for each component.

    Format: CSV

    Download My-Cloner BOM V2 CSV

BOM Contents

The downloadable BOM includes the following sections:

Section Contents
Mechanical Motion components, rods, bearings, belts, pulleys and build plate
Frame Aluminium profiles and custom structural components
Fasteners Screws, nuts, washers and T-nuts
Electronics Power, control, motors, sensors, cooling and Klipper host hardware
Hotend V6-compatible hotend components
3D Printed Parts Complete list of printed parts required for the Rev A build

XLSX or CSV?

Use the XLSX workbook when you want:

  • The complete structured engineering BOM
  • Separate component sections
  • An editable spreadsheet
  • Purchase and sourcing information
  • Notes and specifications

Use the CSV file when you want:

  • A simple machine-readable BOM
  • Easy importing into other software
  • Data processing or scripting
  • A single consolidated component list

Sourcing Components

Purchase links included in the BOM are provided for convenience and may include affiliate links.

The component specification is more important than the vendor link.

If a listed product becomes unavailable, an equivalent component may be used when it meets the required specifications.

Check the Hardware Revision

These files apply to the My-Cloner Rev A.

Do not mix BOM files from older prototypes or previous hardware revisions with the current Rev A build.

For a browser-friendly view of the component lists, see:

Once you have sourced the required components, continue with the:

Assembly Guide

Installed Hardware Update

The owner confirmed additional installed-hardware details on 2026-09-28. These are recorded in Electronic Parts and the I/O Map. The BOM V2 XLSX/CSV downloads have not been revised in this documentation update.